Scanner Follow: The Map Shows Who Your Scanner Is Hearing
Scanner Follow joins your scanner to the UKAFG interactive map. Each time the scanner stops on a frequency, the map lights up the airspace that frequency works and shows only the aircraft inside it, at the right levels โ so the voices you’re hearing come from a short list of aircraft you can see, rather than everything in the sky. On a frequency that isn’t an air traffic one it shows the sites using it near you instead. It works with every Squawker Connect scanner type, hardware or SDR, and with the Fast Scanner.
You need access to the interactive map, which the Squawker PC subscription includes (see Interactive Map Access).
Switching It On
- Any Connect profile โ the ๐บ Follow on map toggle beside the Frequency box on the Connect tab.
- Fast Scanner โ the Map switch at the right-hand end of the Now-Listening panel. It’s the same setting as the toggle above, for that profile.
Switching it on opens the map window inside Squawker PC (or uses the one already open) and a bar appears along the bottom of the map: Following the scanner (profile name) โ waiting for a stop. The toggle is remembered per profile, but only when you move it yourself โ closing the window doesn’t save it off. If you reopen a profile with Follow remembered on, open the map (the Map button on the main window’s General panel) and the stops reach it from there; the toggle’s tooltip says so until you do.
For a hardware scanner, every frequency the radio reports is a stop. For the Fast Scanner it’s the live park โ the map follows the moment the squelch opens, and is told when the scanner resumes.
What a Stop Shows
Say the scanner stops on 124.600. The bar reads something like 124.600 ยท London Control ยท Daventry South S32 ยท FL255โUNL ยท 11 aircraft. The Daventry South volumes are drawn with a bright outline and light fill, the map fits to them (the first time, and only if they aren’t already in view), and every aircraft outside the volume or outside its level band disappears. Stop on 118.700 instead and it’s the Heathrow ATZ, aircraft on the ground and in the circuit.
What’s drawn depends on what the frequency is:
- Area sectors (London, Scottish, Terminal Control) โ every polygon with that name, each with its own flight-level band. A sector can be a dozen separate volumes.
- Western Radar โ its own area, FL195 and above.
- Approach, Director, Radar, Arrival, Departure โ the aerodrome’s CTR, CTAs and TMA from the surface to their top; a 25 nm circle to FL150 where there are none. A military aerodrome’s UHF approach draws its MATZ and CTAs just as its VHF one does.
- Tower, Ground, Delivery, Air/Ground, AFIS โ the ATZ (or a 2.5 nm circle), ground level up to just above its top. Aircraft on the ground show only for tower frequencies.
- LARS โ a circle of the published radius around the unit, surface to FL100.
- MATZ / Zone โ the military zone, surface to 3,000 ft above the airfield.
When one frequency is known to be working several sectors together (bandboxed), the extra sectors come in by themselves, marked (bandboxed). If five or more aircraft in view report a QNH, the bar shows it and altitudes are corrected against aerodrome limits that are set in feet.
The Military Bands
The frequency index runs to 400 MHz, so UHF stops have their own volumes:
- Swanwick Mil consoles โ the sector polygon the console works, 3,000 ft and up.
- Refuelling towlines โ every refuelling area at its published levels, or the one the frequency is named for. Of those, the map keeps the areas you could hear and narrows to the ones with a tanker in them now, naming the tanker.
- Ranges โ the range’s own danger area, surface to its published top (an 8 nm circle where it has none).
- Squadron channels (air-to-air and ops) โ a 60 nm circle on the squadron’s base, and a ring on each of the unit’s aircraft airborne within your reach, named on the bar (“2 located in reach: COBRA11, COBRA12”).
- Air-defence and QRA channels (270.15, 363.1 and the other ASACS channels) โ the military aircraft within your reach; on a QRA channel the QRA aircraft are ringed wherever they are, and while one is up so are the military tankers.
A military stop counts military aircraft only, so the bar reads N military in reach and a civil airliner crossing a Swanwick sector isn’t offered as who you’re hearing.
What You Can Hear: Reach
For the military kinds the map keeps to what your receiver can actually hear: the radio horizon for each aircraft’s height from where you are listening. An aircraft in the volume but beyond your reach is dimmed like one outside it, and a QRA aircraft beyond reach is flagged beyond your reach. Where you are listening from comes, in order, from:
- The receiver position Squawker PC sends with each stop โ the geocoded postcode of the Connect profile (from Squawker PC 2.3.6).
- The map’s Your Location pin, which is remembered once you place it.
- The Scanner postcode saved in your Squawker Connect settings, which Squawker PC 2.3.5 shares with the site.
- The centre of the map, when you are zoomed in to a local view.
With none of these the bar asks you to place Your Location or zoom in.
Sites: Who Uses the Frequency Near You
Every stop also asks who is placed on that frequency within a radius of you โ airfields and other locations, WTR licence holders and amateur repeaters โ and draws them as small rings (amber for a location, pink for a WTR licence, blue for a repeater), each with a tooltip. The bar lists them nearest first: 14 sites within 30 mi: Acme Haulage, Mansfield Taxis, GB3XX, Nottingham (EGBN) +10. A sites within control on the bar sets the radius (10, 20, 30, 50 or 100 miles) and is remembered.
A stop outside the airbands โ a business, PMR, amateur or marine channel โ has no airspace, so the sites are the whole picture: every aircraft is hidden while the stop lasts (aircraft hidden: not an airband channel), the view fits the radius around you with your position marked and a dashed ring at the radius, and the next airband stop puts the aircraft back. A frequency with no placed user says so: no placed user of this frequency within 30 mi (locations, WTR, repeaters). The light-licence channels, for example, are not in the register.
A stop on a channel the map has no volume or site for โ an ATIS, VOLMET, a company frequency, 121.500, HF โ says so in the bar and leaves the previous volume up, dimmed.
When the Scanner Moves On
The last volume stays up until the next stop, so you have time to pick the aircraft out; the bar notes scanning again, last stop kept. The after control on the bar can clear it instead, 15, 30 or 60 seconds after the scanner resumes.
The Bar’s Controls
- ยฑ level slack (0 to 3,000 ft) โ aircraft this far above or below the band still show.
- pad (0 to 10 nm) โ aircraft this far outside the edge still show.
- Dim others โ fade the aircraft outside the volume instead of hiding them.
- after โ keep the last volume, or clear it 15/30/60 s after the scanner resumes.
- sites within โ the radius for the sites list.
- Widen / Narrow (sector stops only) โ add the neighbouring sectors of the same group, drawn dashed, for a night when one frequency is working them all.
- Exit โ leave the mode and show every aircraft again. This also switches the toggle off in the app, as does closing the map window.
Your slack, pad, dim, widen, after and sites settings are remembered in the map.
While following, the map’s own altitude chips and height control are set aside so they can’t hide the aircraft you want; they come back on Exit.
Shared Frequencies
One channel can belong to several aerodromes far apart. Squawker Connect already picks the nearest match for a stop, and the map is told which airport and service that was, so the right volume is drawn. Where a frequency is shared between two aerodromes within range, correct the pick in the Connect window’s Live Scan list and the map follows.
If the Map Stops Following
If the map pane stops answering after a long session, closing the pane and clicking Map again puts it right. Squawker PC 2.3.6 does this for you: it notices a page that has stopped answering, reloads it and re-sends the follow and the last stop.
The Same Mode on the Website
You can drive the mode by hand without Squawker PC: type a frequency into the map’s search box and the first row offers Focus the map on 124.600: its airspace and the aircraft in it. A map link ending in ?focus=124.600 does the same on opening. Place the Your Location pin first and the reach and sites features work there too.
