Skip to main content
How can we help?

Radio Controls (Uniden and Quansheng)

On-screen radio controls (buttons that remotely press your scanner’s own keys over the connection) are available for Uniden models and, since version 2.3.4, for the Quansheng UV-K1/K5 running the F4HWN firmware. Whistler, ICOM CI-V, Proscan, and SDR-based profiles (com0com, SDRuno/SDR# plugin, Fast Scanner) get no control panel; you can watch and log what they receive, but not operate the radio remotely from Squawker Connect.

Uniden

Within Uniden, exactly which buttons you get depends on your specific model:

  • BCD436HP/BCD536HP/UBCD3600XLT/SDS100/SDS200 models — the fullest set: MENU, SYSTEM, DEPT, CHANNEL, AVOID, up/down, ./NO, E/YES, plus a number pad. These models also get a Skip Idle option, which suppresses idle digital frames so the log isn’t cluttered with non-voice transmissions.
  • BCT15X — MENU, SCAN, HOLD, LOCKOUT, up/down, a Quick Key entry box (send a specific channel number directly), ./NO, E/YES, plus a number pad.
  • UBC3500XLT — MENU, F, SCAN, HOLD, LOCKOUT, left/right (this model uses horizontal navigation rather than up/down), ./NO, E/YES, plus a number pad.
  • BCD160DN / BCD260DN — MENU, SCAN, HOLD, L/O, up/down, plus a number pad. These two models don’t support the Skip Idle auto-resume feature.
  • UBC125XLT/C — just the number pad; no MENU/SCAN/HOLD/LOCKOUT buttons for this model.
  • Any other/unspecified Uniden model — no controls at all, unless Squawker Connect auto-detects it as an SDS100/SDS200/UBCD3600XLT-family radio on connect, in which case you’ll get that family’s full control set.

If you don’t see the controls you expect, double-check the specific model selected in your Connect Settings profile — it drives which button set (if any) appears.

Quansheng UV-K1 / UV-K5 (F4HWN firmware)

  • Track VFO — choose which of the radio’s two VFOs Squawker Connect follows and logs. This is chosen live here rather than on the saved profile. If another window has the radio open, the choice is locked until that window closes.
  • A/B — swap the radio’s active VFO (sends F then 2).
  • SCAN — start a channel or frequency scan (a long press of the * key). Memory scanning needs the radio in channel mode.
  • LIST ▸ with a list number — while memory scanning, switch to the next non-empty scan list, or type the list you want (1–24, or 0 for all).

The key presses go over the same USB link as the frequency readout. PTT is never sent.

Tuning From the Map Is Separate

Independently of this button panel, the UKAFG map can put a Uniden, an X36/SDS, a Quansheng or an ICOM CI-V radio on a frequency with its Tune button, and hold the most likely frequency for an aircraft with Track — see Tune, Track and Scan These.

Table of Contents
Scroll to Top
Loading...
Loading...
Loading...
Loading...
Loading...

Contact Us

Couldn't find what you were looking for?

Our support team is here to help. Reach out and we'll respond as soon as possible.