Skip to main content
How can we help?

Managing Device Profiles

Each profile in Fast Scanner represents one physical (or virtual) SDR device, running independently in its own tab.

Adding a Profile

Click ➕ Add profile (only available in Scanner mode) — a new profile is created immediately with no prompts, named “Device N” by default, and starts connecting right away so its Radio list populates. There’s no limit on how many profiles you can add, though each one needs its own physical device to actually scan with.

What Profiles Share

Your scan lists are shared by every profile: a list made on one tab is on all the others, so it doesn’t matter which tab you build it on. Each profile keeps its own radio, its own scan settings and its own choice of which list to scan.

A radio runs one profile at a time: start a profile on a radio another profile is scanning with and you’re asked whether to switch it over. If you have more tabs than radios, remove the spare ones with their ✕; your lists aren’t lost with them.

Renaming a Profile

Type a new name into the Profile name box in the tab’s content area (not the tab header itself, which just displays the name). This box is only visible while the profile is in Scanner mode — switch to Scanner mode first if you want to rename a profile that’s currently in Radio mode.

Removing a Profile

Click the ✕ on a device tab to remove it.

Choosing Which Profile You Hear

Only one profile’s audio plays at a time, controlled by the 🔊 Listen button on each tab. Every profile keeps scanning, detecting, and logging regardless of which one is set to Listen — muting only affects whether you actually hear it. Clicking Listen on a different profile swaps audio instantly; there’s no need to stop or restart anything.

Table of Contents
Scroll to Top
Loading...
Loading...
Loading...
Loading...
Loading...

Contact Us

Couldn't find what you were looking for?

Our support team is here to help. Reach out and we'll respond as soon as possible.