Skip to main content
How can we help?

Satellites: Passes Over You

Summary: Where the space station, the amateur radio satellites and the weather satellites are now, when each next passes over you, and the frequency to listen on through the pass.

The Satellites section of the Layers panel shows the International Space Station, the amateur radio satellites and the weather satellites that pass over the UK. It gives you two things: where each one is right now, and a list of the passes over your own location with the frequency to listen on. It is off until you switch it on, and your choices are remembered.

Switching It On

Open Satellites in the Layers panel and tick Show satellites. Each satellite appears on the map as a marker with its name, and moves every second. Most of them will be somewhere else in the world at any moment, so zoom out to find them.

The Kinds chips choose which satellites are shown and listed:

  • ISS — the space station: crew voice and school contacts, a voice repeater, packet (APRS) and occasional picture events.
  • Voice — FM voice repeaters such as SO-50, AO-123, AO-91 and PO-101. These are the ones a handheld scanner can receive.
  • SSB / CW — transponder satellites such as RS-44, FO-29, JO-97, AO-7 and AO-73. These need a receiver with SSB.
  • Digital — packet digipeaters and scheduled picture transmissions.
  • Weather (SDR) — the Meteor-M weather satellites on 137 MHz. Their pictures are digital (LRPT), so they need an SDR and decoding software. A scanner will not produce a picture.

ISS and Voice are on to begin with.

Your Location

Passes are worked out for one place, so the layer needs to know where you are. It uses your location pin if you have placed one (the Your Location pin button on the map). Without a pin it uses the Scanner postcode saved on your account. The section says which, for example Passes for your location pin, UK time. With neither, it shows the satellites on the map and asks you to place the pin before it lists any passes.

The pass times are worked out on your own device.

The Pass List

Each row is one pass over you, soonest first, grouped by day:

  • Time — when the satellite rises and when it sets, in UK time.
  • Name — which satellite.
  • Highest point — how high it gets in your sky on this pass, in degrees. 90° is straight overhead.
  • Under that, how long until it rises and the main frequency to listen on. A satellite that is above your horizon now says Up now and when it sets.

Two settings shape the list:

  • Passes above — the horizon, 10°, 20° or 30°. This is the highest point a pass must reach to be listed. Low passes are short and weak, and hills and buildings usually hide them. 10° is a sensible start; choose 20° or 30° to see only the good ones.
  • for the next — 12, 24 or 48 hours.

The section’s header shows the next pass at a glance, for example Next: ISS in 2 h 10 min.

A Pass in Detail

Click a pass to open it. The map moves to show the path of that pass and you get:

  • Rises, Peak and Sets — each with its time to the second and the compass direction to look in, plus how long the pass lasts.
  • Each frequency the satellite uses, with its mode, what it carries and a status word.
  • Listen on — the frequency at the start, at the peak and at the end of the pass.
  • Uplink — the frequency and tone licensed amateurs transmit on, where there is one.

The three frequencies matter because of Doppler shift. A satellite moves at about 17,000 mph, so its signal arrives slightly high in frequency as it comes towards you and slightly low as it goes away. On 145 MHz the shift is about 3 kHz each way, which an FM scanner will tolerate. On 435 MHz it is about 10 kHz each way, so tune to the start figure as the satellite rises and step down towards the end figure as it passes. For a transponder satellite the figures are for the low edge of its passband.

Clicking a Satellite

Click a marker for its details: what kind it is, how high up it is, its frequencies with their status words, and its next pass over you. The map also draws two things for that satellite only:

  • Footprint — a circle around the area that can receive it at this moment. If you are inside the circle, it is above your horizon.
  • Track — where it goes over its next orbit.

Close the popup to clear them.

Status Words

Each frequency carries a word saying how active it has been lately:

  • Active — in regular use.
  • Occasional — in use now and then.
  • No recent reports — nothing lately. It may still be working.

A frequency that is switched off is not listed. Some satellites have a note of their own, for example one that only works in sunlight, or one whose repeater has to be switched on by an operator before it carries anything.

What You Need

  • ISS and the FM voice satellites — a handheld scanner on narrow FM and a clear view of the sky. A pass above 30° is easy with a standard aerial; lower passes are helped by a better one. Keep the squelch open, because the signals are weak and fade.
  • SSB / CW satellites — a receiver or SDR with SSB, and tuning by hand through the pass.
  • Weather satellites — an SDR, a 137 MHz aerial and decoding software. The older NOAA satellites that sent pictures a scanner could record were switched off in 2025.

Good to Know

  • Pass times depend on orbit data that is refreshed several times a day. If it ever becomes more than a few days old the section says so, and times may be a little out.
  • The list covers radio passes only. It does not say whether the space station will be visible to the eye.
  • Satellites are shown worldwide, but the pass list is only for your location.

As with the rest of the map, this is for interest only. See About This Map – Data Sources & Disclaimer.

Table of Contents
Scroll to Top
Loading...
Loading...
Loading...
Loading...
Loading...

Contact Us

Couldn't find what you were looking for?

Our support team is here to help. Reach out and we'll respond as soon as possible.