UBCD3600XLT Menus, Data Naming & Settings Options

Summary: How to move around the UBCD3600XLT’s menus, name things, and the options in the Settings menu.

Navigating the Menus

Press Menu. Turn the scroll control – right moves down, left moves up. The highlighted item shows in reversed colours. Press E/yes or the scroll control to select it. Press Menu to go back a level, and press Avoid to leave all menus and return to the previous mode.

Data Naming

You can name any Favorites List, System, Site, Department, Channel, Location, Custom Search, Recording Session, Tone-Out or SAME group with up to 64 characters.

• Turn the scroll control until the character you want appears.
• Press 6 (>) to move the cursor right, 4 (<ATT) to move left.
• Press ./no to clear a character; press it twice to clear all characters.
• Press E/yes when finished.

Settings Menu

Press Menu, scroll to Settings and press E/yes.

• Adjust Key Beep – Off, Level 1-15, or Auto (the master volume level).
• Battery Option – battery save, charge time and low-battery alert. See UBCD3600XLT Batteries, microSD Card & Turning It On.
• Band Defaults – change the default modulation (AM, NFM, FM, WFM or FMB) and step (5, 6.25, 7.5, 8.33, 10, 12.5, 15, 20, 25, 50 or 100 kHz) used for each band. Auto modulation and step use these values. See the default table in UBCD3600XLT Troubleshooting & Reference Tables.
• Auto Shutoff – Off, 5, 10, 15, 30, 45 minutes, or 1, 2 or 3 hours.
• Set Clock – the clock for the display and the default tag for recordings. Set the year (2013-2099), month and day; the hour (0-23) and minute; your time zone; and daylight saving on or off.
• Replay Options – Set Replay Duration (30, 60, 90, 120, 150, 180, 210 or 240 seconds) and Review Recordings (play, delete or rename each recording session).
• Restore Options – Clear User Data or Reset User Settings. See UBCD3600XLT Sentinel Software, Profiles, Firmware & Resetting.
• See Scanner Information – memory used, firmware version and serial number.
• Keypad Lock – toggled with Func and the power key.

Display Options

Backlight, contrast, unit ID display and ID format are covered in UBCD3600XLT Reading the Display & Icons.

Alerts

Every alert in the scanner uses the same settings: Set Alert Tone (Alert 1-9 or Off), Set Level (1-15, or Auto to follow the master volume), Set Alert Light with Set Color (Off, Blue, Red, Magenta, Green, Cyan, Yellow or White) and Set Pattern (On, Slow Blink or Fast Blink). You’ll find them on channels, on the system’s Emergency Alert, on unit IDs, on Close Call, and on tone-outs.