How can we help?
Category - Radio Mode
Articles
Type a frequency directly into the box and press Enter to tune immediately — you don’t need to click elsewhere first. When […]
Demodulation Mode Auto heads the Mode list on every radio, followed by AM, NFM, and WFM. USB, LSB, and CW […]
When using USB, LSB, or CW, a clarifier slider appears — a ±300 Hz nudge to the demodulated pitch that doesn’t change […]
The Radio mode signal meter isn’t a traditional S-meter — it reads in dBFS (the in-channel signal level relative to full scale), […]
The Decode dropdown lets you run one of Squawker PC’s native digital decoders directly on whatever you’re tuned to: ACARS, AIS, POCSAG, RTTY, or DMR data— or None to just […]
ick ● Record to save the demodulated audio at your tuned frequency to a WAV file — this captures precisely what’s being […]
Bands A built-in panel of common bands grouped into Ham, Marine, Aviation, and Broadcast. Clicking one tunes the VFO straight to that band’s centre […]
Below 30 MHz, Radio mode tells you what’s on the frequency you’re tuned to from three sources. Built In: Aviation […]
The waterfall shows a live spectrum trace above a scrolling history below it, with your tuned frequency marked. Controls beneath […]