Category - UBC125XLT Handheld - Owner's Manual

Summary: What the UBC125XLT handheld scanner is, what it comes with, and the frequency range it covers – as a […]

Summary: The scanner’s keypad and controls, how Function mode works, and what the icons on its display mean. Turning It […]

Summary: Volume, squelch, backlight, contrast, the charging timer, keypad lock, beep tone, and resetting the scanner to factory defaults. Volume […]

Summary: The difference between scanning and searching, what CTCSS/DCS does, and the three types of bank the scanner uses to […]

Summary: Entering a frequency into a channel by hand, naming it, and setting its CTCSS/DCS, modulation, priority and delay. Before […]

Summary: Running Scan mode, the four Priority modes, and locking channels out temporarily or permanently. Running Scan Mode Press Scan […]

Summary: Searching preset service bands, your own custom ranges, or a one-off frequency range, plus storing and locking out what […]

Summary: How Close Call finds nearby strong transmissions directly, its four modes, and where it works well and where it […]

Summary: CTCSS tones and DCS codes at a glance, what “birdies” are, and faster ways to fill your channels than […]

Summary: Answers to the questions that come up most often – the “Nothing to Scan” message, the recommended squelch setting, […]